Follow

Step 1: Setup Your Frame

Watch the Setup Video

Read the Setup Guide

Thank you for purchasing a PhotoSpring Digital Photo Frame. You've got the most advanced photo frame on the market. This guide will take you through step by step setup.

In the PhotoSpring Box

In the box you should see a PhotoSpring frame, a charging stand and AC charger. Take out them all out. Save the box just in case.

IMG_4386.JPG

 

Power up the Frame

First find a place for the frame

It should be:

  • close to a power outlet
  • in an area where it can be easily seen
  • away from glare producing light

 

Plug the AC Adapter the a power outlet

IMG_4388.JPG

 

Plug the other end of the AC Adapter into the back of the charging stand.

IMG_4389.JPG

 

Place the frame onto the charging stand

On the bottom of the frame you should see a set of 4 holes. The middle two holes go onto the charging stand.

IMG_4390.JPG

Just place those middle two holes right on top of the corresponding fittings on the charging stand.....

IMG_4391.JPG

 

It should fit like you see here:IMG_4392.JPG

 

If properly done, the frame will power up on its own. You'll see an animation of the PhotoSpring logo.

IMG_4394.JPG

A NOTE ON POWER: On some PhotoSpring frames the frame is designed to power on automatically when plugged in. This means when you press the Power Button to power down the frame, it will immediately turn back on. We recommend using Sleep instead of Power off. If you want to power completely off, unplug the AC Adapter first and then power down.

Go through Setup

Welcome Screen. You can swipe left and right to see some beautiful pictures. When you're ready to start tap on the photo.

Flowers_Startup.png

Plug In. If you see the screen below it means your frame is not being powered correctly. Please reseat your frame on the stand and make sure the AC power is connected to the stand and the AC outlet. If you are plugged in the frame will automatically advance to the next step.

Plug_in.jpg

 

Connect to WiFi.

Tap your wifi network from the list that appears. Enter your password if necessary. If successful you will see a blue dot next to the network you are connected to. The network will also be in bold. Tap Next to continue.

Screen_Shot_2017-08-16_at_3.58.19_PM.png

Note: earlier versions of the frame do not support WEP HEX based security. If you have a WiFi SSID set to WEP, its probably better you set it to a more secure WPA based security. If this is not possible, then do your frame setup on another wifi network. The frame will receive an update that fixes this issue and allows it to work on WEP HEX based wifi networks.

 

Agree to Terms of Service

The frame will download the latest Terms of Service. Accept and continue. Screen_Shot_2017-08-16_at_4.00.30_PM.png

 

Wait for the Latest Version Download

PhotoSpring will download the latest version of its PhotoFrame software. This is a good time to go get some coffee or call a friend.

Screen_Shot_2017-08-16_at_4.01.05_PM.png

When downloading is done, you can continue by tapping Next

Screen_Shot_2017-08-16_at_4.05.37_PM.png

 

Setting Time

Set the frame to your local time. Most likely the frame will be able to get the local time for you within a few seconds. If not, tap the time and date buttons to edit the time/date.

Screen_Shot_2017-08-16_at_4.08.46_PM.png

 

Name the frame

Important to let people sending you photos if this is a private or public setting. Don't worry, you can change this later.

Screen_Shot_2017-08-16_at_4.08.57_PM.png

 

Identify yourself as the owner

When you ask friends and family for photos, its nice for them to know who they are sending photos to.

Screen_Shot_2017-08-16_at_4.09.08_PM.png

 

Almost Done!!!

This next screen just gives you a little encouragement. You'll need to setup an account next. We'll walk you through it.

Screen_Shot_2017-08-16_at_4.12.04_PM.png

 

Send an email to yourself to open an account

Type your email in the text box to send yourself a link to open an account. Click Submit. 

Screen_Shot_2017-08-16_at_4.12.18_PM.png

 

The Frame will wait for you to create an account and connect to it

Check your email for the invitation to create an account and connect to the frame. If the email doesn't arrive check your spam folders. Or check that you used the correct email address with no typos. If none of this works email us at support@photospring.com

Next Step: Create an Account

Click here to go over how to create an account. This will be done through a web page. You can then come back to your frame and finish the frame setup.

If you are successful at creating an account you may be asked to enter a 6 character frame code. It should appear on a screen like you see below. If you are successful at creating an account and connecting it to the frame then this screen will disappear on its own.

Screen_Shot_2017-08-16_at_4.15.52_PM.png

A popup may appear on the frame asking you to grant yourself permission permission.

  • Check the box - you are the owner. Ownership has privileges.
  • Allow yourself to send photos to this frame

Screen_Shot_2017-08-16_at_4.22.06_PM.png

0 Comments

Please sign in to leave a comment.
Powered by Zendesk